Ferrocement Photo Gallery

Ferrocement Photos


SuperMaximusBucketVice


ii.jpg

9 files, last one added on Nov 12, 2005
Album viewed 83 times

 

1 albums on 1 page(s)

Random files - Bill&Julie's Gallery
dd.JPG
1001 views004- As we get it closer to matching the bucket, the High Spots will get wider and closer together.
cc.JPG
979 views003- By rolling the bucket in the cut out we transfer color.
Then we file off the color. And repeat, ect,ect,
aa.JPG
1013 views001- Start by tracing around the bottom of a bucket on a 2 x 8 or 2 x 10...
You will do the same thing to a 2 x 6...
hh.JPG
1209 views008- Here we can see the strap hindge for the jaw.
bb.JPG
1085 views002- Then we need to find the High Spots.
ff.JPG
1361 views006- Sure it takes time, but I did the complete project in one evening.
ee.JPG
1100 views005- Here I am using a PVC pipe and sandpaper for final adjustment.
ii.jpg
1925 viewsoo9- Part "A" is slightly tappered ( 3? ) to tighten part "B" against the
bucket. Part"C" is a strap for added strength.
It also traps the right end of "B" so it is not pulled away from the plywood.
The main part of the vise is a 2x10, and the jaw is a 2x6.
All parts except parts "A" and "B" are screwed from the other
side to the plywood..
Part "A" is wider on the left end, so kick it to the right to clamp,
and to the left to unclamp. The small piece of 2 x 4 on the end of
Part "A" is so you won't have to chase it around the garage.


Last additions - Bill&Julie's Gallery
ii.jpg
1925 viewsoo9- Part "A" is slightly tappered ( 3? ) to tighten part "B" against the
bucket. Part"C" is a strap for added strength.
It also traps the right end of "B" so it is not pulled away from the plywood.
The main part of the vise is a 2x10, and the jaw is a 2x6.
All parts except parts "A" and "B" are screwed from the other
side to the plywood..
Part "A" is wider on the left end, so kick it to the right to clamp,
and to the left to unclamp. The small piece of 2 x 4 on the end of
Part "A" is so you won't have to chase it around the garage.

Nov 12, 2005
hh.JPG
1209 views008- Here we can see the strap hindge for the jaw.Nov 12, 2005
gg.JPG
1133 views007- Pick a chunk of plywood big enough to stand on.Nov 12, 2005
ff.JPG
1361 views006- Sure it takes time, but I did the complete project in one evening.Nov 12, 2005
ee.JPG
1100 views005- Here I am using a PVC pipe and sandpaper for final adjustment.Nov 12, 2005
dd.JPG
1001 views004- As we get it closer to matching the bucket, the High Spots will get wider and closer together.Nov 12, 2005
cc.JPG
979 views003- By rolling the bucket in the cut out we transfer color.
Then we file off the color. And repeat, ect,ect,
Nov 12, 2005
bb.JPG
1085 views002- Then we need to find the High Spots.Nov 12, 2005